Plant Disease Micro Station
This station is preconfigured with different sensors. The base station is a WatchDog 1450 Micro Station. The following sensors are connected for measuring parameters, that can help to determine whether plant diseases or pests are likely to happen.
These sensors are:
	- A rain meter (tipping bucket type)
- Leaf wetness sensor
- Air temperature 
- Air humidity
The micro station is protected by a radiation shield.
 
Software
For configuring the station and to down and upload the data to a PC you need  Spec 9 Software. This software can be purchased separately. A Bais and a Pro version is available.
 
Specifications
 
	
		
			|  | WatchDog Micro Plant Disease Station |  | 
		
			|  |  | Range | Accuracy |  | 
		
			|  | Air Temperature | -40 to 85ºC | ±0.6°C at -20 to 50°C, else ±1.2°C |  | 
		
			|  | Relative Humidity | 0 to 100% | 3% at 25°C (10 - 90%), else ±5% |  | 
		
			|  | Rainfall | 0,25mm (resolution) | +/- 2% bij < 5 cm per uur |  | 
		
			|  | Leafwetness | 0 (dry) to 15 (wet) | -- |  | 
		
			|  | Other |  |  |  | 
		
			|  |  | - Water-resistant case (without radiation shield) |  | 
		
			|  |  | - LCD display |  | 
		
			|  |  | - logs up to 10.584 data intervals |  | 
		
			|  |  | - CR2450 battery included |  | 
		
			|  |  |  |  |