Horiba LAQUAtwin F-11 Fluorid Meter
Only a single droplet of sample is needed for measuring fluorid ions te meten in water or water-based samplesmonsters as ling as there is no oily substances presesnt. After simple calibration steps a measurement is easily done for fast and accurate results.
With temperature correction via internal temperature calibration. You can calibrate at 1 or 2 points. The meter will recognize the 1 ppm and 10 ppm solutions that are supplied with the meter. A list of items that are supplied with the meter:
- 1 ppm and 10 ppm florid solution (14 ml each)
- TISAB solution (14 ml)
- Sample Sheets B (5 pieces)
- CR2032 Batteries
- Syringe, Cup and Manuals
Specifications
| |
Model |
LAQUAtwin F-11 |
|
| |
Meetprincipe
|
Ion Selective Electrode
|
|
| |
Minimum Monsterhoeveelheid
|
0.3ml (0.01 ml met sampling sheet B)
|
|
| |
Meetbereik
|
0,1 tot 990 ppm (mg/L)
|
|
| |
Resolutie
|
0,1 tot 9.9 ppm: 0,1 ppm
10 tot 99 ppm: 1 ppm
100 tot 990 ppm: 10 ppm
|
|
| |
Nauwkeurigheid
|
± 2% van werkelijke waarde
|
|
| |
Kalibratiepunten
|
1 of 2
|
|
| |
Temperatuurdisplay / resolutie
|
0 tot 50.0 ºC / 0,1 °C
|
|
| |
Temperatuurkalibratie / luchtvochtigheid
|
5 tot 40.0 ºC / ≤ 85% relatieve vochtigheid (geen condensatie)
|
|
| |
Display
|
Custom (monochrome) digitale LCD met backlight
|
|
| |
Bedrijfstemperatuur
|
5 tot 40.0 ºC
|
|
| |
Bedrijfsomgevingsvochtigheid
|
85% of minder relatieve vochtigheid (geen condensatie)
|
|
| |
Batterij
|
CR2032 batterijen (2)
|
|
| |
Levensduur Batterijen
|
Ca. 400 uren bij continue gebruik zonder backlight
|
|
| |
Materiaal
|
ABS epoxy
|
|
| |
Dimensies
|
164 x 29 x 20 mm
|
|
| |
Gewicht
|
ca.. 55 g (inclusief sensor en batterijen)
|
|
| |
Functies
|
- Auto Standard Recognition
- Changeable High and Low Calibration Values
- Multiplication Compensation
- Temperature Calibration
- Auto Hold / Auto Stable Measurement
- Switchable Backlight
- Automatic Power Off (30mins)
- Low Battery Indicator
- IP67 Dust / Waterproof
- Replaceable Sensor
|
|
