Horiba LAQUAtwin Ca-11 Calciummeter
This pocketsize laboratorium quality meter is used for measuring calcium ions in all kinds of samples. Water quality, milk, soil testing are but a few purposes where this meter is used. Since it can pick up ions in the smalles amount of sample, you can take a measurement wherever you want. Use this meter where some water is in the sample. Oil based samples are not suitable.
The meter is supplied with 150 & 2000ppm calcium standards, 5 x sampling sheets B, 2 x CR2032 batteries, dropper, instruction and quick manuals.
The sensor can measure calcium levels in blood, but it is not designed to do it. The proteins in the blood impact the sensor negatively. For measuring calcium levels in animal blood. we advise you to purchase the LAQUAtwin CA-11C meter.
Specifications
|
Model |
LAQUAtwin Ca-11 |
|
|
Measurement Principle
|
Ion Selective Electrode
|
|
|
Minimum Sample Volume
|
0.3ml (0.05ml with sampling sheet B)
|
|
|
Measurement Range
|
4 to 9900 ppm (mg/L)
0.1 to 250 mmol/L
|
|
|
Resolution
|
0 to 99 ppm: 1 ppm
100 to 990 ppm: 10 ppm
1000 to 9900 ppm: 100 ppm
|
|
|
Accuracy
|
± 20% of actual value
|
|
|
Calibration Points
|
Up to 2
|
|
|
Temperature Display
|
0 to 50.0 ºC
|
|
|
Temperature Calibration
|
5 to 40.0 ºC
|
|
|
Display
|
Custom (monochrome) digital LCD with backlight
|
|
|
Operating Temperature
|
5 to 40.0 ºC
|
|
|
Operating Humidity
|
85% or less relative humidity (no condensation)
|
|
|
Power
|
CR2032 batteries (2)
|
|
|
Battery Life
|
Approx. 400 hours in continuous use without backlight
|
|
|
Material
|
ABS epoxy
|
|
|
Dimensions
|
164 x 29 x 20 mm (excluding projections)
|
|
|
Mass
|
Approx. 55 g (including sensor and batteries)
|
|
|
Functions
|
- Auto Standard Recognition
- Changeable High and Low Calibration Values
- Multiplication Compensation
- Temperature Calibration
- Auto Hold / Auto Stable Measurement
- Switchable Backlight
- Automatic Power Off (30mins)
- Low Battery Indicator
- IP67 Dust / Waterproof
- Replaceable Sensor
|
|