Imacimus 10 Multi Ion Meter
New technology enabling to measure up to 10 different ions and other parameters with one single measurement. Measuring plant nutrients in plant sap or water is done effieciently and accurately with this meter. No need for taking several measuremens. Only one is sufficient shortening the time you to take for having a reading of all the paramaters, from ISE to pH, EC and water hardness.The meter has 7 different ISE electrodes housed in one probe and with the reference pH electrode a measurememt is given within 60 seconds.
Depending on the configuration of the meter you can measure one or more or all of the following parameters:
| • Kalium/Potassium K+ |
 |
• Chloride Cl- |
| • Calcium Ca2+ |
• Natrium/Sodium Na+ |
| • Ammonium NH4+ |
• Nitrate NO3- |
| • Magnesium Mg2+ |
• pH |
With the above parameters the software also shows the
water hardness and
EC, so you can get
10 different parameter results with one session.
Sampling in the field or at the office or lab
The meter enables you to sample and make measurements wherever you are; either in the field, office or lab. The only thing you'll need to do is to connect the.meter to a laptop and take samples. Within a minute you will get the readings of all the parameters of your choice.The meter is handy and compact and is powered by the usb connection.
Available Models and What is Included
We offer two configurations of the Imacimus 10 Multi Ion Meter:
- Set A2: a full set with Imacimus 10 Multi Ion meter including all 7 ISE sensor electrodes and calibration soliutions for general use
- Set A1: a set with Imacimus 10 Multi Ion Probe without electrodes and calibration solutions
Included in the set are (depending on configuration):
- Mullti ION PROBE
- 7 ISE electrodes for the Multi ION PROBE: Ca+2, Cl-, K+, Na+, NH4+, NO3-, Mg2+ (not available in set A1)
- Multi Channel IC10 METER
- USB cable (for data / power)
- Reference electrode / pH.
- Multi ION Calibration Solutions - General Use (3 x 125 mL)(not available in set A1)
- Multi ION Conditioning Solution - General Use (125mL) (not available in set A1)
- pH Buffers 4 & 7 (50mL each)
- Tweezers
- Calibration Case (without solutions)
- Carrying Case
- Software imacimus® for Windows (free download)
Set A1. No Electrodes and Solutions.
With this configuration you can set up your own confirguration with Electrodes of your choice and accompanying solutions. You are not required to purchase all 7 ISE Electrodes. Choose the ones you want. You may not have the possibility to get the EC and Water Hardness values if the set is not complete. Do not forget to purchase the required calibration and conditioning solutions matching your need .
Plant Sap, Soil and General Use
The Imacimus 10 meter can be used for all kinds of measurements. The calibration solutions for general use, which is provided in the Imacimus 10 Full Set is for use in broad applications. In the case of measuring plant sap or soil samples it is advised to use the appropriate calibration solution sets for each specific use. The different calibration solutions are available separately on our website.
Check the values you often have when meausuring for choosing the right solutions.
| Item Number |
Use |
Ion mg/L |
Ca2+ |
Cl- |
K+ |
Na+ |
NH4+ |
NO3- |
Mg2+ |
| 22HP08 |
General |
High |
360 |
750 |
390 |
230 |
40 |
1320 |
110 |
| Low |
36 |
75 |
39 |
23 |
4 |
132 |
11 |
| 22SAV00 |
Plant Sap |
High |
1000 |
3530 |
5000 |
500 |
500 |
10000 |
500 |
| Low |
10 |
353 |
500 |
50 |
50 |
100 |
50 |
| 22TLB2 |
Soil |
High |
200 |
425 |
120 |
275 |
16 |
45 |
40 |
| Low |
20 |
43 |
12 |
28 |
2 |
45 |
4 |
Note. For even more specific uses like Sea Water or Algae there are other solutions available. Please check our range further on our website.
Software and Set Up
For configuring the meter and read the measurements on your laptop or PC, you will neeed the Imacimus software. This software is free to download when you have purchased a meter. With the serial number you can receive the free dowloand by clicking on the following link.
Requesting Imacimus Software
Please take a look at this video for setting things up.
Conditioning and Calibration
Before use the meter needs a proper conditioning and calibration. Use the P1.P2 and P3 solutions and the conditioning solution for this purpose.
Take a look at the video how to prepare and measure.
Delivery Time
We will purchase these meters from the manufacturer direcly after your order in order to warrant fresh electrodes and solutions. This means the meter comes with a delivery time of about a week.
Specifications
| |
Imacimus 10 |
|
| |
Meter |
|
|
| |
|
Channels |
8 (7 Ion and 1 pH) |
|
| |
|
General Range |
1 to > 10.000 mg/L |
|
| |
|
Minimum Sample |
10 ml |
|
| |
|
Units |
mmol/L or mg/L – ppm |
|
| |
|
|
|
|
| |
Multi Ion Probe |
Linear Range |
pH Range |
Accuracy |
Repeatability |
|
| |
|
Potassium |
- 0,4 to 39000 mg/L
- 0.00001 to 0,1 mol/L
|
1 to 9 |
+/- 4% |
+/- 10% |
|
| |
|
Sodium |
- 2.3 to 23000 mg/L
- 0,000006 to 0,1 mol/L
|
1 to 9 |
+/- 4% |
+/- 10% |
|
| |
|
Nitrate |
- 0,6 to 31000 mg/L
- 0,00005 to 0,5 mol/L
|
2 to 11 |
+/- 4% |
+/- 10% |
|
| |
|
Calcium |
- 0,4 to 4000 mg/L
- 0,00001 to 0,1 mol/L
|
3,5 to 8 |
+/- 8% |
+/- 20% |
|
| |
|
Chloride |
- 1,3 to 35.000 mg/L
- 0,0004 to 1 mol/L
|
2 to 12 |
+/- 4% |
+/- 10% |
|
| |
|
Magnesium |
- 2,4 to 2.400 mg/L
- 0,000, to 0,1 mol/L
|
3 to 8,5 |
+/- 8% |
+/-20% |
|
| |
|
Ammonium |
- 0,9 to 9.000 mg/L
- 0,000005 to 0,5 mol/L
|
4 to 8,5 |
+/- 4% |
+/- 10% |
|
| |
|
|
|
|
|
|
